Belkin KVM over IP User Manual - Page 64
AutoScan Mode
UPC - 722868596104
View all Belkin KVM over IP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Using the Switch from a Remote Console AutoScan Mode 1 The AutoScan feature allows you to set your Switch to scan and monitor the activities of all connected servers one by one. The Switch remains on one server 2 for a preset number of seconds, before switching to the next server. The time interval allotted for each server can be defined or adjusted through the OSD 3 menu (see the "Scan Time" section). When the Switch is in AutoScan mode, it is also in view-only mode. This means 4 that input from the console (keyboard and mouse) will not be transmitted to the server in focus. Cancel AutoScan to regain control of the server. 5 To activate the AutoScan function, press the "AutoScan" button on the Switch. You can also activate AutoScan on your keyboard by pressing "Scroll Lock", "Scroll Lock", space bar, "F4". 6 To disable AutoScan, press any button on the front panel or any key on the keyboard. 7 Note: There is no mouse or keyboard control in AutoScan mode. This is necessary to prevent data and synchronization errors. If the user is using the 8 mouse or keyboard when the Switch is switching between ports, data flow may become interrupted and could result in erratic mouse movement and/or wrongcharacter input when using the keyboard. 9 10 section 61