BenQ RM8602K DMS Local User Manual - Page 23
The Control Tab (Single BenQ Display), Power, Quick, Settings, WOL Wake, on-LAN
View all BenQ RM8602K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Using DMS Local 23 The Control Tab (Single BenQ Display) When a single BenQ display is selected in the device panel, the control tab features the following items: 1 2 3 4 No. Item Description Powers on the display, puts it in standby mode, or powers off (shuts down) the display. 1 Power 2 Quick Settings To be able to power on the display via DMS Local ensure that WOL (Wake-on-LAN) Settings is enabled on the display and that the display is connected to the network via the LAN (RJ-45) port. Wakeon-LAN does not work over a Wi-Fi connection. Features buttons and menus to control your display. See Quick Settings for more information on the quick settings controls. Allows the display to be able to be powered on remotely from a shutdown state via the LAN port. . WOL (Wake3 on-LAN) Settings The WOL (Wake-on-LAN) Settings function only works on displays that are connected to the network via their LAN (RJ-45) port. Displays that are connected to the network via a Wi-Fi connection will not be able to use the WOL (Wake-on-LAN) Settings function. Send or save custom control command codes for the display 4 Direct Control Commands using the BenQ protocol for display control. See Direct Command Controls for more information on the basic controls.