BenQ RM8602K DMS Local User Manual - Page 26

26 Using DMS Local Direct Command Controls The direct command control section of the control tab allows you to create custom controls for your display using direct commands, for instance you can create a command to have your display rotate its screen clockwise 90-degrees. • Functions available to displays that support direct command controls and their corresponding commands vary by model, check the specifications and user manual for your display for available functions and commands. • Direct command controls can only be used on one display at a time. The direct command control section is shown below: Creating a One-Time-Only Direct Command To create a one-time-only direct command, follow the steps below: 1. Enter the direct command code in the Direct Command Input field. Commands must be in hexadecimal format. See for more information on creating direct commands see Direct Command Help. 2. Click Send and wait for a confirmation that the command has been executed successfully. To prevent quick changes to the display's state the Direct Command Input will be grayed out while DMS Local is confirming whether the direct command is successful. Once the direct command has been confirmed or the confirmation process has timed out the field will return to its normal state.