Bernina 1008 Owners Manual - Page 35
Stabilizers
View all Bernina 1008 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
MASTERING YOUR BERNINA® BERNINA® Electronic 1008 STABILIZERS Tear-Away Stabilizer: The most commonly used type of stabilizer, designed to provide temporary support of stitching. Placed on the wrong side of the project and carefully pulled away once stitching is complete. Available in three weights - heavy, medium, and light. Multiple lightweight layers may be preferable to one heavy layer, as they are easier to remove. Cut-Away Stabilizer: The most widely used stabilizer in the commercial market. Does not break down under dense stitching, due to the high fiber - rather than paper - content. Excess stabilizer is trimmed away after stitching (leave approximately ¼" of stabilizer around the edges). Web/Poly-Mesh Type Stabilizer: A specially formulated cut-away stabilizer developed for use behind lightweight or light-colored fabrics. Water-Soluble Stabilizer: Used for backing and topping, in single or multiple layers. Available in two weights. Excellent for decorative stitching and cutwork as there are no remnants of stabilizer left after removal (it dissolves). As a topping, it keeps stitches from being lost in heavily napped fabrics such as velvet and corduroy. Knit Fusible Interfacing: A very lightweight, flexible interfacing sometimes used as a stabilizer, it gives permanent support (as an underlining) to a fabric. Perfect for plackets, garment edges, under buttonholes, and anywhere extra body and stability are needed. Woven Fusible Interfacing: This interfacing is sometimes used as a stabilizer and is generally cut on the bias to provide better drape. Gives a firmer hand or finish than knit or non-woven interfacings. Used for lapels, facings, and anywhere a great deal of extra body and stability are needed. Iron-On Stabilizer: A non-woven product similar to paper. Perfect for knits, this tearaway stabilizer is temporarily bonded to the fabric, inhibiting the tendency of the material to stretch. Heat Removable Stabilizer: Woven from strands of fiber that are burned away at a low temperature, heat removable stabilizers are perfect for heirloom stitchery. Liquid/Spray Stabilizers: Wonderful for sheer fabrics from which all stabilizer must be removed after stitching, these products are painted or sprayed onto the fabric. Several light applications of spray stabilizer are preferable to one heavy application. MASTERING YOUR BERNINA® 1/10/02 Electronic 1008/35