Bernina 1008 Owners Manual - Page 36
Manual Buttonholes
View all Bernina 1008 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
MASTERING YOUR BERNINA® BERNINA® Electronic 1008 MANUAL BUTTONHOLES Fabric: Stabilizer: Needle: Thread: Presser Foot: Heavy flannel, 6" x 6" 1 piece, 3" x 6" 90/14 Embroidery 30 weight cotton embroidery Standard Buttonhole Foot #3 Owner's manual pg.____ • Fold one piece of fabric in half to 3" x 6". Press and insert the stabilizer. • Draw a line 1½" from the fold along the 6" length. • Mark two horizontal lines, running between the fold and the drawn line, spaced about 2" apart. • Set the buttonhole knob at position #1. • Adjust stitch length to satin (0.5). • Position the foot over the first line and place the fold on the 5/8" line behind the presser foot. • Sew the first side of the buttonhole. • Stop at the drawn line with the needle out of the fabric. • Turn the buttonhole knob to position #2. • Sew back to the beginning of the first bead and stop. • Turn the buttonhole knob to position #3. • Sew the bartack and the right bead; stop and touch quick reverse. • Sew the top bar tack. The fourth position sews the second bead, the fifth position sews the bottom bartack and the sixth position sews the securing stitches. • Sew a second buttonhole on the second line. • Cut one buttonhole open. • Trim and mount the sample. MASTERING YOUR BERNINA® 1/10/02 Electronic 1008/36