Bernina Artista 630 User Guide - Page 63

Buttonhole Program Functions The functions below appear on the function toolbar at the lower edge of the screen display when any buttonhole (Nos. 51-54, 56, 59 and 63) is selected. Manual Buttonhole • touch symbol to open special screen display • sew manual buttonhole in 4 or 6 steps (according to buttonhole type) Application: • for individual manually sewn buttonholes • to repair existing buttonholes Programming Buttonhole Length • the symbol is automatically highlighted in blue (active) when a buttonhole is selected • using the Quick Reverse button on head frame a buttonhole length can be determined directly, or the displayed length can be programmed directly by touching the symbol • when the buttonhole is programmed the symbol is turned off (inactive, yellow) • if a new length is to be programmed the symbol has to be reselected Buttonhole Length - Direct Entry Length (in mm) or Onscreen Button Measurement • touch symbol to open special screen display • enter the buttonhole length (stitch length in mm) directly with the stitch length or stitch width knob • to measure hold button to the left side of screen • determine the buttonhole length by placing the vertical black line precisely on the right side of the button • 2mm for the button thickness will be added automatically (with on-screen button measurement only) Application: • simple method to determine buttonhole size by direct entry of the length in mm or by measuring button on the screen Buttonholes - Summary 63 031196.50.04_0507_a630_EN