Bernina Artista 630 User Guide - Page 95

Embroidery Settings 1 «Adjust Reference Position» calibrates the needle to the center of the embroidery hoop. Adjusting can only be activated if the embroidery module and the oval embroidery hoop are attached. It is only necessary to adjust the Reference Position once as the same setting changes will apply to all the hoops. • insert the embroidery template into the hoop • touch «Check» • the display changes • the hoop position is read and the needle positioned in the middle • if the needle is now not positioned exactly over the center point of the template, it has to be adjusted with the arrows • touch «OK» • the adjustment will be saved, the display closes and the selection menu appears Embroidery Settings 2 • touch «To Next Page» • in theis screen the embroidery speed can be adjusted Motor Speed • turning stitch width knob or touching «+» or «-» changes the basic settings of the speed by 6-10 stitches • the number in the bar reflects the stitches per minute, the basic settings are indicated by a dark bar Setup-Program 95 031196.50.04_0507_a630_EN