Binatone Speakeasy Combo 3865 User Manual - Page 45
Base Settings, De-register a Handset
View all Binatone Speakeasy Combo 3865 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
7.4 Base Settings 7.4.1 De-register a Handset This operation should only be necessary if one of your cordless handsets becomes faulty or lost and needs to be replaced. You will need to enter the 4-digit system PIN (Default PIN is 0000) in order to de-register a handset from the base station. A de-registered handset will have the antenna flashing and --UNREG-- on the display. Note: You cannot de-register the handset that you are currently using. 1. Press and to select BS SET. 2. Press and to select DEL HS. 3. Press and the display shows PIN?--4. Enter the 4-digit system PIN. 5. Press and the first handset number is displayed. 6. Press to step through the list of registered handsets, and select the numbe of the handset you want to de-register. 7. Press to confirm, and the chosen handset will be de-registered. 7.4.2 Change the Dial Mode You should normally leave the Dial Mode at its default setting of TONE (also called DTMF) unless the phone is connected to an old exchange that only recognises PULSE dialling. Note: If PULSE dialling is set, you can press the * key to switch to TONE dialling for the rest of that call. 1. Press and to select BS SET. 2. Press and to select DIALMODE. 3. Press and to select TONE or PULSE. 4. Press to confirm. 43