Binatone Speakeasy Combo 3865 User Manual - Page 51

8 REGISTRATION IMPORTANT: When you purchase a phone system, all handsets are already registered to your base, so you do not need to register them. Handset registration is only necessary when you buy extra handsets or if a handset has become faulty. You can register additional handsets to have up to 5 handsets per base unit, with each handset's number (1 to 5) shown on its display. Each handset can be registered to up to 4 different bases, but can only operate with one base at a time. (See 7.3.4 Select Base, for how to change between bases.) To check whether a handset is registered, make sure mains power to the base unit is switched on and the handset is within range. The handset's display should show its number and the should be steadily on. If the display shows "- UNREG - ", you need to register the handset again using the following process: 1. On the base station, press and to show REGISTRATION, and then press to put the base station into registration mode. The base display will show "PLEASE WAIT" and the base will stay in registration mode for about 1 minute, so the following handset sequence must be completed within this time. 2. Press and to select REGISTER. 3. Press to display BASE 1. 4. Press to select which base number you want to use. (Note: a * will be shown next to any base numbers the handset is already registered with, and if selected the new registration will overwrite it.) 5. Press to display PIN?----. 6. Enter the 4-digit system PIN (default is 0000). 7. Press to confirm, and the display will show SEARCH'G. If the handset registration is successful, the display will change to standby mode with the new handset number and the will stop flashing. The handset will automatically be allocated the next available handset number. If the handset registration is unsuccessful, the will still flash. 49