Bosch WFVC540SUC User Manual - Page 8
Notice, Warning
UPC - 825225878995
View all Bosch WFVC540SUC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
The accessory parts bag contains: 1. Covers to be placed over the holes for the transport bolts (after removing the transport bolts during washer installation). 2. Wrench for leveling. 3. Clamp for drain hose. On the back of the washer: 1. power cord with plug 2. hot and cold water connections 3. 4 shipping bolts Useful tools The following tools are helpful: 1. Flat head screwdriver. 2. Socket wrench13 mm 3. Closed wrench 13 mm NOTICE DO NOT push against the washer door glass. Risk of breakage! Dimensions a = 27.0 in. (68.7 cm) b = 29.7 in. (75.4 cm) c = 36.8 in. (93.5 cm) (minimum)* 37.8 in. (96.2 cm) (maximum)* d = 20.7 in. (52.5 cm) e = 49.8 in. (126.3 cm) * height of appliance depends upon extension of height-adjustable feet. Minimum height is with feet turned all the way in, against the bottom of the washer. Maximum height is with feet extended as far as permitted (must leave thread of screw engaged enough for foot to be stable (1/4 inch / 6.4 mm) when extended). Door opening angle 160° Approx. weight = 220 lbs (100 kg) Installation area d WARNING Never ground the washer to plastic plumbing lines, gas lines or hot water pipes. This appliance must be installed on a solid floor and well leveled due to the higher spin speeds available. If installing the machine on a wood floor over a basement or on a second floor, the floor may need to be reinforced. Sound, vibration, and risk of the washer walking" will be influenced by the structure and stability of the floor surface where the appliance is installed. q Soft floor surfaces, such as carpets or surfaces with foam backing, are not suitable. If possible, place the washing machine in a corner of the room. If the washing machine is to be installed on a weak wood floor, consider the following: q Screw a section of water-resistant plywood (at least 3/4" thick) to the floor. The plywood should be sized to fit the footprint of the washer, approximately 27" wide x 29.7" deep, or 54" wide x 29.7" deep to extend underneath both the washer and the dryer for best results and even height of the appliances. q Secure the feet of the washing machine with holding brackets. Order the holding brackets (set) from Bosch Customer Service (WMZ 2200). 8