Bose Lifestyle 28 Installation guide - Page 18

System Installation Instructions Installing the TV on/off detector (optional) The TV on/off detector senses whether your TV is on or off. This enables the media center to automatically switch the TV on, as needed, when another video source (DVD, cable/satellite box, etc.) is selected. If you choose not to use the sensor, you will need to turn the TV on separately each time it is needed. Note: This device will not work with LCD and plasma TVs, so if you are using those devises you may want to skip these steps. 1. Plug the connector on the end of the cord into the TV SENSOR jack on the back of the media center. 2. Position the TV on/off detector on the back of your TV as shown in Figure 16. Note: DO NOT use the mounting strip yet to affix the detector. Wait until your system is operating and you can determine that the sensor is working properly from this location. Refer to "Testing the TV on/off detector" in your LIFESTYLE® Operating Guide. Figure 16 TV on/off detector installed on your TV Back of TV TV on/off detector Mounting the detector using the mounting strip Media center rear panel TV SENSOR IR EMITTER SERIAL DATA 33V DC POWER 1.1A RECORD TAPE AUX VCR TV AM L L L L L FM 75 ANTENNA 1 OPTICAL OPTICAL R R R R R VIDEO INPUTS COMPOSITE S-VIDEO 2 SPEAKER ZONES INPUT OUTPUT DIGITAL AUDIO OUTPUTS DIGITAL DIGITAL DIGITAL AUDIO INPUTS DIGITAL COMPOSITE S-VIDEO VIDEO OUTPUTS TV SENSOR jack Note: If you have a projection TV, the bottom rear of the enclosure is the best location for mounting the detector. Turning off the internal speakers in your TV When you listen to TV sound through your LIFESTYLE® system, the speakers in your TV should not be on. Use the on-screen menus in your TV to select "Internal Speakers: Off" (your on-screen message may be different). You can also lower the volume of your TV to its lowest setting. Refer to your TV owner's guide for detailed instructions. 18 AM259777_02_V.pdf • April 23, 2002