Bose Lifestyle 28 Installation guide - Page 25

Reference Setting up a second listening zone Your LIFESTYLE® home entertainment system can direct sound from one or two sound sources (such as CD, AM/FM tuner, TAPE, or AUX) to two different listening zones at the same time. What is a zone? Each listening area, whether a room or a group of rooms (including outdoor areas), is called a zone. Your primary listening area is set up as zone 1. What do I need for setting up a second zone? • A Bose® powered speaker system that is compatible with your home entertainment system. An existing stereo system can also be connected (special adapter required). • The appropriate LIFESTYLE® system cable to connect the zone 2 speaker system to the SPEAKER ZONES 2 connector on the rear panel of the media center. • A second LIFESTYLE® system remote control to operate the zone 2 sound. See your dealer or contact Bose for information on obtaining additional powered speakers, remote controls, cables, and adapters for connecting additional equipment. How do I set up a speaker system in a second zone? 1. Choose a location for the speaker system in zone 2. 2. Connect the audio input cable from the zone 2 system to the SPEAKER ZONES 2 output on the rear panel of the media center. 3. When power is connected and you are ready to set up your second remote control, see "Setting up a second listening zone" in your LIFESTYLE® system operating guide. Figure 24 Media center-to-zone 2 connections TV SENSOR IR EMITTER SERIAL DATA 33V DC POWER 1.1A RECORD TAPE AUX VCR TV AM L L L L L FM 75 ANTENNA 1 OPTICAL OPTICAL R R R R R VIDEO INPUTS COMPOSITE S-VIDEO 2 SPEAKER ZONES INPUT OUTPUT DIGITAL AUDIO OUTPUTS DIGITAL DIGITAL DIGITAL AUDIO INPUTS DIGITAL COMPOSITE S-VIDEO VIDEO OUTPUTS Zone 2 output connection Zone 2 stereo adapter kit cable (Mini-DIN connector is marked "FIX") Zone 2 speaker connections Control Left channel Right channel Note: Before using your zone 2 speakers, you may need to change the "Zone 2 Protocol" setting for the zone 2 speakers you are using. See "Changing the System Setup" in your operating guide. Note: For zone 2, use only cables that have a mini-DIN connector marked "FIX". Cables marked "VAR" should not be used, unless specified in the owner's guide for the product. 25 AM259777_02_V.pdf • April 23, 2002