Brother International 2460N Users Manual - English - Page 127

c List of Factory settings The following table shows the initial factory default settings. ✒ Notes • The settings are subject to the emulation mode. Effective modes are indicated in parentheses in the following table. • The following settings cannot be restored to the factory settings with the RESET menu in the FACTORY SETTINGS mode: INTERFACE MODE, HRC SETTING, PAGE PROTECTION, SCALABLE FONT, LOCK PANEL, PAGE COUNTER and local language for display messages. • The COPY setting is always restored to the factory setting when the printer is turned off and on again. • It is not possible to reset the NETWORK settings using the control panel. If you want to reset the print server to its default factory settings (resetting all information such as the password and IP address information), hold down the Network Test button on the Network board (NC-4100h) for more than 5 seconds. MMOODDEE PAPER QUALITY MMEENNUU SOURCE MP FIRST MP SIZE MANUAL FEED DUPLEX OUTPUT RESOLUTION HRC TONER SAVE DENSITY FFaaccttoorryy SSeettttiinngg =AUTO =OFF =A4/LETTER =OFF =OFF =STANDARD =600 =MEDIUM =OFF 0 3-42