Brother International 2460N Users Manual - English - Page 234
Quick reference of commands, CCITT G3/G4 and TIFF (original command), Bar Code Control, o
UPC - 012502600787
View all Brother International 2460N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 234 highlights
APPENDIX Quick reference of commands CCITT G3/G4 and TIFF (original command) One of the unique features of the PCL mode of this printer is that it supports CCITT G3/G4 type data compression and TIFF format. Bar Code Control The printer can print bar codes in the HP LaserJet, EPSON FX-850, and IBM Proprinter XL emulation modes. Print Bar Codes or Expanded Characters Code ESC i Dec 27 105 Hex 1B 69 Format: ESC i n ... n \ Creates bar codes or expanded characters according to the segment of parameters "n ... n". For more information about parameters, see the following "Definition of Parameters." This command must end with the " \ " code (5CH). [Definition of Parameters] This bar code command can have the following parameters in the parameter segment (n ... n). Since parameters are effective within the single command syntax ESC i n ... n \, they don't take effect in the subsequent bar code commands. If certain parameters are not specified, they take the default settings. The last parameter must be the bar code data start ("b" or "B") or the expanded character data start ("l" or "L"). Other parameters can be specified in any sequence. The prefix of each parameter can be a lowercase or upper-case character: for example, "t0" or "T0", "s3" or "S3", etc. Appendix-35