Brother International 2460N Users Manual - English - Page 197
For DOS users
UPC - 012502600787
View all Brother International 2460N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
For DOS users PPrroobblleemm Unable to print from application software. RReeccoommmmeennddaattiioonn • Check that the DOS application software interface settings match that of your printer: for example, if you are using a parallel printer cable, you would most likely set your DOS software printer port to LPT1. • Check if the printer has any printer alarms. • Check if the appropriate printer is selected in your application software. • If the serial interface is used, make sure that the RS-232C serial interface is selected with the slide switch. Make sure the interface settings are correctly set up in INTERFACE mode using the control panel. Make sure the serial parameters of baud rate, parity and stop bits match between your application software and the printer. 6-32