Brother International 2460N Users Manual - English - Page 52
understands that the envelopes will be used in a laser printer. All envelopes
UPC - 012502600787
View all Brother International 2460N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
✒ Note • When printing, the inside tray automatically rises to feed paper into the printer. • If envelopes get smudged during printing, set the print density to a higher value in the QUALITY mode with the control panel setting for darker printouts. To adjust the print density setting, see Chapter 3. • Envelope joints that are sealed by the manufacturer should be secure. • All sides should be properly folded without any wrinkles or creases. Most envelopes will perform acceptably on your printer. However, some envelopes will have feed and print quality problems because of their construction. A suitable envelope should have edges with straight, well creased folds and should not have more than two thicknesses of paper along the leading edge. The envelope should lie flat and not have baggy or flimsy construction. Purchase quality envelopes only from a supplier who understands that the envelopes will be used in a laser printer. All envelopes should be tested prior to use to ensure desirable print results. ✒ Note The manufacturer neither warrants nor recommends the use of a particular envelope because envelope properties are subject to change by the envelope manufacturer. The entire responsibility for the quality and performance of envelopes lies with the customer. 1-32