Brother International 2460N Users Manual - English - Page 50
The print surface must be face up., Press and slide the paper width adjuster to fit the envelope size.
UPC - 012502600787
View all Brother International 2460N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
☛ 4. Place the envelopes in the multi-purpose tray so they touch the back of the tray and remain below the limit M mark. Up to M mark. Fig. 1-19 ✒ Note Make sure that the neatly stacked paper is correctly seated on the multipurpose tray, otherwise paper may not be fed correctly, resulting in a skewed printout or a paper jam ☛ 5. Press and slide the paper width adjuster to fit the envelope size. Fig. 1-20 ✒ Note When you place paper on the multi-purpose tray, note the following: • The print surface must be face up. • The leading edge must be placed inside first so it rests lightly against the printer. • The top of the paper stack must be under the guides that are on both sides of the tray. 1-30
1-30
☛
4.
Place the envelopes in the multi-purpose tray so they touch the back of the
tray and remain below the limit
▼
mark.
Fig. 1-19
✒
Note
Make sure that the neatly stacked paper is correctly seated on the multi-
purpose tray, otherwise paper may not be fed correctly, resulting in a skewed
printout or a paper jam
☛
5.
Press and slide the paper width adjuster to fit the envelope size.
Fig. 1-20
✒
Note
When you place paper on the multi-purpose tray, note the following:
•
The print surface must be face up.
•
The leading edge must be placed inside first so it rests lightly against
the printer.
•
The top of the paper stack must be under the guides that are on both
sides of the tray.
Up to
▼
mark.