Brother International BM-917B Instruction Manual - English - Page 19

8. PREPARATION BEFORE SEWING 8-6. Setting the number of stitches CAUTION Turn off the power switch before setting the number of stitches. The machine may operate if the pedal is pressed by mistake, which could result in injury. * The motor will keep turning even after the power is switched off as a result of the motor's inertia. Wait until the motor stops fully before starting work. Open bed cover L, and then set the number of stitches as follows. Pull out the stitch control knob (1) and then turn it in the direction of the arrow. 1991M Pull out the stitch control knob (1) and then turn it in the direction of the arrow. 1992M 1. Pull out the stitch control knob (1) and then turn it in the direction of the arrow. 2. Remove the shoulder screw (2) and roller (3) from the bed base, and then install them to the stitch hanging gear (4). 1993M 13 BM-917B, 917C