Brother International HS-5300 Users Manual - English - Page 16
Power Supply, Environment
View all Brother International HS-5300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
English: HS3 User's Guide, Chapter 2 USER'S GUIDE OPERATING AND STORAGE ENVIRONMENT Please take note of the following information before using the printer. Power Supply Use the printer within the specified power range. AC power: ±10% of the rated power voltage in your district Frequency: 50 Hz (220 V- 240 V) or 60 Hz (110-120 V) The power cord, including extensions, should not exceed 5 meters (16.5 feet). Do not share the same power circuit with other high-power appliances, particularly an air conditioner, copier, shredder and so on. If it is unavoidable that you must use the printer with these appliances, it is recommended that you use a voltage transformer or a high-frequency noise filter. Use a voltage regulator if the power source is not stable. Environment The printer should be installed near a power outlet which is easily accessible. Use the printer only within the following ranges of temperature and humidity. Ambient temperature: 10°C to 35°C (50°F to 95°F) Ambient humidity: 20% to 80% (without condensation) For optimum image quality it is recommended to use this printer within the range: Temperature: 15°C to 30°C (59°F to 86°F) Humidity: 30% to 60% Because the ink on printouts might flake off when rubbed or the print might appear to be a lighter color if you use the printer out of this range, for optimum print quality use the printer within the shaded range shown in the following diagram. (%) 80 60 40 20 0 10 20 30 (°C) Ventilate the room where you use the printer. Place the printer on a flat, horizontal surface. Keep the printer clean. Do not place the printer in a dusty place. 1-4