Brother International HS-5300 Users Manual - English - Page 47
Installation of SIMMs, Unpack a SIMM and hold it by its edge.
View all Brother International HS-5300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
English: HS3 User's Guide, Chapter 5 CHAPTER 5 OPTIONS Installation of SIMMs When you install SIMMs, follow these steps: 1. Turn off the printer and unplug the power cord from the wall socket. Note Be sure to turn the printer off before installing or removing the SIMMs. 2. Remove the five marked screws holding the main controller board. Fig. 5-2 Remove the main controller board 3. Unpack a SIMM and hold it by its edge. Note Do not touch the memory chips or the board surface. If static electricity collects, it can damage the memory. 5-3
CHAPTER 5 OPTIONS
5–3
English: HS3 User’s Guide, Chapter 5
Installation of SIMMs
When you install SIMMs, follow these steps:
1.
Turn off the printer and unplug the power cord from the wall socket.
Note
Be sure to turn the printer off
before installing or removing the SIMMs.
2.
Remove the five
marked screws holding the main controller board.
Fig. 5-2
Remove the main controller board
3.
Unpack a SIMM and hold it by its edge.
Note
Do not touch the memory chips or the board surface.
If static electricity collects,
it can damage the memory.