Brother International HS-5300 Users Manual - English - Page 63
Re-Packing the Printer
View all Brother International HS-5300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
English: HS3 User's Guide, Chapter 6 RE-PACKING THE PRINTER CHAPTER 6 MAINTENANCE ! Caution Whenever you transport the printer, use the packing materials which are provided with your printer. Also, follow the steps below to re-pack the printer, or the printer may be damaged. Before Re-Packing the printer Before your starting to re-pack the printer, you need to support the print head and head gap lever with the Styrofoam block as shown below. Figure 6-22 Insert the Styrofoam blocks Note You need to move the print head to the left by hand until it stops. Do not insert the Styrofoam in the wrong direction as shown below. GOOD BAD 6-13
CHAPTER 6 MAINTENANCE
6–13
English: HS3 User’s Guide, Chapter 6
RE-PACKING THE PRINTER
!
Caution
Whenever you transport the printer, use the packing materials which are
provided with your printer. Also, follow the steps below to re-pack the printer, or
the printer may be damaged.
Before Re-Packing the printer
Before your starting to re-pack the printer, you need to support the print head
and head gap lever with the Styrofoam block as shown below.
Figure 6-22
Insert the Styrofoam blocks
Note
You need to move the print head to the left by hand until it stops.
Do not insert the Styrofoam in the wrong direction as shown below.
GOOD
BAD