Brother International HS-5300 Users Manual - English - Page 41
Test Print Mode, Online, Alarm, FF/Cont, Manual, Ready
View all Brother International HS-5300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
English: CS3 User's Guide, Chapter 4 CHAPTER 4 CONTROL PANEL Test Print Mode The printer has the following test print modes. 1. Keep the Online button depressed until all four LEDs light. Then, release the button. The printer enters test print mode. The Alarm LED blinks to indicate that the first choice, Print Config, is selected. See the table below. 2. Press the Online button to select another test. Every time you press the button, the blinking LED changes to select another choice. See the table below. 3. Press the FF/Cont button to perform the selected choice. LED Alarm Manual Data Ready Choice Print Config Print Fonts I Print Fonts P Test Print Function The printer prints the current printer settings. The printer prints a list of the printer resident fonts. The printer prints a list of the permanent download fonts. The printer prints a test page. 4. The printer returns to the ready status after printing. Note Press the buttons gently. Do not press with too much force or hold the buttons down for a long time. If you do the operation might now start. 4-5