Brother International HS-5300 Users Manual - English - Page 48
When you install different capacities of SIMMs, be sure to install the larger
View all Brother International HS-5300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
English: HS3 User's Guide, Chapter 5 USER'S GUIDE 4. Install as many SIMMs as you need. • Set the SIMM into the slot at an angle. • Push the top of the SIMM gently towards the vertical until it clicks into place. Notes When installing SIMMs, be sure to install them in the order slot 1 then slot 2. When you install different capacities of SIMMs, be sure to install the larger capacity SIMM in slot 1 and the smaller capacity SIMM in slot 2. Fig. 5-3 Installing the SIMMs 5. Refit the main controller board and secure it with the 5 screws. 6. Plug in the power cord and turn on the printer. If you have installed the SIMMs incorrectly, the printer prints a report to alert you. 5-4
USER’S GUIDE
5–4
English: HS3 User’s Guide, Chapter 5
4.
Install as many SIMMs as you need.
• Set the SIMM into the slot at an angle.
• Push the top of the SIMM gently towards the vertical until it clicks into
place.
Notes
When installing SIMMs, be sure to install them in the order slot 1 then slot 2.
When you install different capacities of SIMMs, be sure to install the larger
capacity SIMM in slot 1 and the smaller capacity SIMM in slot 2.
Fig. 5-3
Installing the SIMMs
5.
Refit
the main controller board and secure it with the 5 screws.
6.
Plug in the power cord and turn on the printer.
If you have installed the SIMMs incorrectly, the printer prints a report to alert
you.