Brother International HS-5300 Users Manual - English - Page 67
Print Quality Problems, Shift, Clean, Online
View all Brother International HS-5300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
English: HS3 User's Guide, Chapter 7 Print Quality Problems CHAPTER 7 TROUBLESHOOTING Note Press the buttons gently. Release the two buttons immediately after pressing the Test button and the DATA LED will start to blink. If it does not, the buttons were held down for too long and you will need to start the test selection again. t Printing a test page Set the printer to off-line first by pushing the Online Button once. Make sure that A4 or Letter size paper is loaded in the feeder. Print a test page by pushing the Test button while holding down the Shift button. Test Clean Shift Fig. 7-1 Test page t Cleaning the print head If you see some horizontal lines as below, perform head cleaning. Set the printer to offline first by pushing the Online Button once. Push the Clean button while holding down the Shift button. The printer cleans the surface of the print head. During cleaning, the Online LED is off. Print a test page again after the printer returns to the Online state and check that there are no dots missing. Test Clean Shift Fig. 7-2 Cleaning the print head 7-3