Brother International HS-5300 Users Manual - English - Page 40

Shift+Test Button, Shift, Clean

Get Brother International HS-5300 PDF manuals and user guides View all Brother International HS-5300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

English: CS3 User's Guide, Chapter 4 USER'S GUIDE Shift + Test Button Set the printer to off-line by pushing the Online Button first. Pressing the Test button while holding down the Shift button starts the test print. Check the printed test page and if you find any printing problems, perform the print head cleaning as described below. Release the two buttons immediately after pressing the Test button and the DATA LED will start to blink. If it does not, the buttons were held down for too long and you will need to start the test selection again.  Note Press the buttons gently. Do not press with too much force or hold the buttons down for a long time. If you do the operation might now start. Shift + Clean Button Set the printer to off-line by pushing the Online Button first. Pressing the Clean button while holding down the Shift button starts head cleaning. If you see any problems on printouts, clean the print head and try again. Release the two buttons immediately after pressing the Test button and the DATA LED will start to blink. If it does not, the buttons were held down for too long and you will need to start the test selection again.  Note  Do not open the top cover during the head cleaning operation.  Press the buttons gently. Do not press with too much force or hold the buttons down for a long time. If you do the operation might now start. 4-4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
USER’S GUIDE
4–4
English: CS3 User’s Guide, Chapter 4
Shift + Test Button
Set the printer to off-line by pushing the Online Button first.
Pressing the
Test
button while holding down the
Shift
button starts the test
print.
Check the printed test page and if you find any printing problems,
perform the print head cleaning as described below.
Release the two buttons immediately after pressing the
Test
button and the
DATA LED will start to blink.
If it does not, the buttons were held down for too
long and you will need to start the test selection again.
Note
Press the buttons gently.
Do not press with too much force or hold the buttons
down for a long time.
If you do the operation might now start.
Shift + Clean Button
Set the printer to off-line by pushing the Online Button first.
Pressing the
Clean
button while holding down the
Shift
button starts head
cleaning.
If you see any problems on printouts,
clean the print head and try
again.
Release the two buttons immediately after pressing the
Test
button and the
DATA LED will start to blink.
If it does not, the buttons were held down for too
long and you will need to start the test selection again.
Note
Do not open the top cover during the head cleaning operation.
Press the buttons gently.
Do not press with too much force or hold the
buttons down for a long time. If you do the operation might now start.