Brother International Innov-is NQ1700E Operation Manual - Page 18
Caution
View all Brother International Innov-is NQ1700E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Winding/Installing the Bobbin ■ Setting the wireless LAN connection from the [Others] menu The [Others] menu on page 9 of the settings screen contains the following items. Winding/Installing the Bobbin CAUTION • Use the plastic bobbin that comes with this machine or bobbins of the same type. The bobbin's height is 11.5 mm (approx. 7/16 inch). SA156 is Class 15 type bobbin. Winding the bobbin This section describes how to wind thread onto a bobbin. 1 2 3 4 1 TCP/IP settings can be manually entered. 2 Shows the MAC address. 3 Use when proxy settings are required. 4 Resets the wireless LAN connection settings. Memo • When winding bobbin for embroidery, be sure to use the recommended bobbin thread for this machine. Open the top cover. a Place the bobbin on the bobbin winder shaft so that the b notch in the bobbin aligns with the spring on the shaft, and then slide the bobbin winder shaft to the right until it snaps into place. 1 Notch 2 Bobbin winder 1 shaft spring 2 16