Brother International Innov-is NQ1700E Operation Manual - Page 34

Embroidering Memo • If [Embroidery Frame Identification View] in the settings screen is set to [ON], the pattern can be edited in the screen as if that embroidery frame is attached. ■ Selecting character patterns Press . a Press the key of the font you want to embroider. b Press a tab to display the desired selection screen, and c then type in the text. 1 Current line number a b 2 Tab a b 1 The embroidering area for the selected frame is displayed. 2 Patterns that will not fit in the selected frame appear shaded and cannot be selected. • There are three embroidering area sizes for embroidery frame (small). When [Embroidery Frame Identification View] is set to [ON] for embroidery frame (small), the area for arranging patterns can more easily be seen. The area outside of the embroidering area will have a different background color. 1 2 3 4 1 2 cm × 6 cm (approx.1 inch (H) × 2-1/2 inches (W)) 2 3 cm × 5 cm (approx.1-1/8 inches (H) × 2 inches (W)) 3 4 cm × 3 cm (approx.1-1/2 inches (H) × 1-1/8 inches (W)) 4 Patterns are arranged outside of the embroidering area. • To enter a space, press . • After selecting a character if you would like to change the character size press . The size changes each time you press the key, from large to medium to small. After the character size is changed, all characters on the same line will have the new character size. • If you make a mistake, press to erase the mistake. • To check all entered characters, for example, when there are multiple text lines, press . • To add multiple lines, press . • When the Japanese font is selected, the text can be switched between being written vertically and horizontally by pressing . Press . d • For details on editing the pattern, refer to "Editing Patterns (Pattern Editing Screen)" on page 42. ■ Selecting frame patterns Press . a Press the key of the frame shape you want to b embroidery. Press the key of the frame pattern you want to c embroidery. 32