Brother International Innov-is NQ1700E Operation Manual - Page 47
Embroidering linked characters
View all Brother International Innov-is NQ1700E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Editing Patterns (Embroidery Settings Screen) Embroidering linked characters Follow the procedure described below to embroider linked characters in a single row when the entire pattern extends beyond the embroidery frame. Example: Linking "DEF" to the characters "ABC" using embroidery frame 10 cm × 10 cm (4 inches × 4 inches) (sold separately with some models) Select the character patterns for "ABC", and then press a and . Press . b Press , and then press . c Press h to cancel the current character patterns. Select the character patterns for "DEF", and then press i and . Press . j Press , and then press . k The needle is positioned in the lower-left corner of the pattern. The embroidery frame moves so that the needle is positioned correctly. 2 Use l to align the needle with the end of the embroidering for the previous pattern. EMBROIDERY The needle is positioned in the lower-left corner of the pattern. The embroidery frame moves so that the needle is positioned correctly. Press . d Lower the embroidery foot and then press the "Start/ e Stop" button to begin embroidering. After the characters are embroidered, and the threads f are cut, remove the embroidery frame, and then press for [Finished embroidering]. 1 End of the embroidering Press . m Lower the embroidery foot and press the "Start/Stop" n button to begin embroidering the remaining character patterns. a Reposition the fabric in embroidery frame so that the g right side of the letter "C" will be partially inside the embroidery frame; being careful so letters remain straight and level. Then reattach frame again so that the remaining characters ("DEF") can be embroidered. 45