Brother International Innov-is NQ1700E Operation Manual - Page 38
Embroidery Foot Auto Down
View all Brother International Innov-is NQ1700E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Embroidering Press . f ■ Resuming embroidery after turning off the power The current color and stitch number are saved when embroidery is stopped. The next time the machine is turned on, you have the option to continue or delete the pattern. To return to the area in the pattern where you stopped g embroidering, follow steps c through f in the next section. ■ If the thread breaks during embroidering Press the "Start/Stop" button to stop the machine. a If the upper thread is broken, redo the upper b threading. If the bobbin thread is broken, press and follow the directions in steps a through f from the previous section to reset the bobbin. Press . c Embroidery Foot Auto Down You can choose a setting to automatically lower the embroidery foot at the beginning of embroidering. Press to display the settings screen, and then a display page 3 by pressing / . Set [Embroidery Foot Auto Down] to [ON]. b 1 Press , , or to move the needle back the d correct number of stitches before the area where the thread broke. 1 When set to [ON], pressing the "Start/Stop" button when the presser foot is raised automatically lowers the presser foot before starting embroidering. Memo • If you cannot move back to the area where the thread broke, press to select the color and move to the beginning position of that color, then use , or to move ahead to slightly before where the thread broke. Press e to return to the original screen. Press (Presser foot lifter button) to lower the f presser foot, and press the "Start/Stop" button to continue embroidering. 36