Brother International KE-436C Inner Clamping Device Instruction Manual - Engli - Page 17
Adjustment of the work clamp crank horizontal position
View all Brother International KE-436C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
3. 調整 3. ADJUSTMENT 3-3 3-3. Adjustment of the work clamp crank horizontal position 1 2 3 4 Loosen the nut (3) and push in or pull out the adjusting bolt (4) so that the work clamp crank (2) can be horizontal when the reversal cylinder piston rod (1) is moved to the left extreme. 3-3-1. 確認(KE-436B、436C) 3-3-1. Verification (KE-436B, 436C) 2624Q 2973Q 1 1 2 2 3 4 3 5 5 6 6 7 R(8 4 3 1. Press the MENU switch (1) until the B.T. COUNTER indicator (2) illuminates. 2. While pressing the TEST switch (3), press the R/W switch (4). * The indicator shows . 3. Depress the work clamp switch (5). Verify that whenever the work clamp switch (5) is depressed, the work clamp crank (6) flips left or right. * Make sure that the work clamp crank (6) does not hit the work clamp plate (7) and the positioning plate R (8). 4. Press the TEST switch (3) again to end the test mode. 2974Q 2975Q KE-435C,436C 14