Brother International LK3-B434E MKII Instruction Manual - English - Page 23
Installing the needle sub plate, so that it is
View all Brother International LK3-B434E MKII manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
3. INSTALLATION 3-20. Installing the needle sub plate 1. Install the four needle sub plate supports q with the four screws w. q w r t e y 2. Insert the needle sub plate e from the front of the machine so that it is level. NOTE: Insert the needle sub plate e so that the X feed lever cap r sits on top of the needle sub plate e. 3. Install the needle sub plate e with the four screws t. 4. Loosen the screws w and make fine adjustments to the height of the needle sub plate e so that it is at the same height as the needle plate y. !0 i o u o 5. Provisionally secure the two auxiliary plate supports u with the washers i and the screws o and !,0 and then firmly tighten the screws o and !0 in that order. i !0 17 LK3-B434E Mark II
17
LK3-B434E Mark II
3. INSTALLATION
3-20. Installing the needle sub plate
1.
Install the four needle sub plate supports
q
with
the four screws
w
.
2.
Insert the needle sub plate
e
from the front of the
machine so that it is level.
NOTE:
Insert the needle sub plate
e
so that the X feed lever
cap
r
sits on top of the needle sub plate
e
.
3.
Install the needle sub plate
e
with the four screws
t
.
4.
Loosen the screws
w
and make fine adjustments
to the height of the needle sub plate
e
so that it is
at the same height as the needle plate
y
.
5.
Provisionally secure the two auxiliary plate sup-
ports
u
with the washers
i
and the screws
o
and
!0
, and then firmly tighten the screws
o
and
!0
in that order.
q
w
e
y
t
r
o
!
0
i
o
u
i
!
0