Brother International PR-1000 PE-DESIGN NEXT CW Instruction Manual PRCW1 - Page 14

Tutorial 1: Creating a Cutwork Pattern Filled with Net Stitching (Cutwork Wizard) c Specify settings in the Cutwork Wizard in the following order (1) - (5). (1) (2) (3) (4) (5) e Specify cutting line type in "Cutting Line". Select whether the fabric will be cut along the cutting line or whether the cutting line will remain as running stitches. For this example, select "Cutting". Cutting (default) Select this setting to cut the fabric with a machine installed with cutwork needles. (1) Stabilize Cut Edge (2) Cutting Line (3) Secure Water-Soluble Stabilizer (4) Net Fill (5) Covering Satin Stitch b Memo: • The settings specified in the wizard are stored with the software and recalled the next time that the wizard is started. • To return all parameters to their default settings, click "Default". d Specify running stitching along the edge before cutting in "Stabilize Cut Edge". By specifying that running stitches be sewn before the fabric is cut, the cut edges are reinforced, preventing them from unraveling. For this example, select "Yes". Running Stitch Select this setting to sew the cutting line, then cut along the cutting line with scissors. f Specify securing of the water-soluble stabilizer in "Secure Water-Soluble Stabilizer". Running stitches will be sewn to secure the water-soluble stabilizer after the fabric has been cut. In order to prevent embroidery from losing its shape after it has been cut, place water-soluble stabilizer in the cutout areas and sew it in place. For this example, select "Yes". 12