Brother International MFC-J6710DW Quick Setup Guide - English - Page 5

4 Install the ink cartridges Note Make sure you install the Starter Ink Cartridges included with your machine first. a Make sure that the power is turned on. The LCD shows No Ink Cartridge. b Open the ink cartridge cover a. e Store the orange protective part in the holder inside the machine as shown. Make sure that the two projections on the bottom of the orange protective part fit in the two slots in the holder. f Gently close the scanner cover using the finger holds on each side. 1 c Remove the orange protective part a. 1 Note Do not throw away the orange protective part. You will need it if you transport the machine. d Lift the scanner cover into the open position. WARNING Be careful not to trap your fingers under the scanner cover. Always use the finger holds provided on each side of the scanner cover when opening and closing it. 5