Canon 3323B001 Administrator's Guide - Page 14

10 | Installing and configuring the connector Configuring the connector This section explains all the connector configuration options and the procedure for setting up an Express connector profile for more streamlined use (see page 33). To configure a connector profile: 1 In the console tree, select Quick Connect > Properties. 2 Select the Display tab and then configure the Image and Label options for the connector button. See "Configuring the Display settings" in the eCopy ShareScan Installation and Setup Guide or the eCopy Quick Connect Help. Note: The button that the user sees at the eCopy-enabled device displays the information that you specify on this tab. To avoid confusion, if you create more than one connector profile, you should give each profile a unique button label. 3 Select the Destinations tab and then define a scanning destination (see page 11). 4 Select the File Name tab and then define any file naming fields (see page 16). 5 Select the Index File tab and then define any index fields (see page 18). 6 Click Save, select or specify the profile name, then click Save. The system saves your settings as part of the connector profile, or creates a new profile. See "Creating and saving connector profiles" in the eCopy ShareScan Installation and Setup Guide or the eCopy Quick Connect Help. 7 In the console tree, select Quick Connect > Services. The Services pane appears. 8 Configure the connector services. See "Configuring Connector Services" in the eCopy ShareScan Installation and Setup Guide or the eCopy Quick Connect Help. 9 Click Save, select the profile name, then click Save.