Canon CR-X300 Remote Camera Control Application User Manual - Page 15

Displaying Camera Video in the Video Display Area Click a camera in the camera list to display its video in the video display area. (2) (3) (4) (1) (5) (1) [Camera List] Click the displayed camera to show/hide the video in the video display area. Cameras whose video is shown in the video display area are indicated with an orange line. (2) Camera number The camera number for the video display area is displayed. The camera number is assigned according to the video display area layout in the display order, starting with 1. For details, refer to "Changing the Video Display Area Layout" (P. 16). (3) Operation Selection Button By clicking the button on the upper right of the image display of each camera, it is possible to switch the operation when the video is clicked. : Moves camera angle so that the clicked position is in the center of the screen. : Focus is adjusted to the clicked position. For further details, refer to "[PTZ/Focus]" (P. 18). (4) Video display area Displays camera video. The pan/tilt position is displayed at the left and bottom edges of the image, and the zoom position is displayed at the right edge. : The camera is on standby. : Not connected to the camera. (5) Tally lamp display The camera tally lamp status is displayed by a red box when programming, or a green box when previewing. 15