Canon CR-X300 Remote Camera Control Application User Manual - Page 30
Calling a Preset, Trace Function, [Trace] Tab
View all Canon CR-X300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Note • [home] is the setting when the camera was launched (home position). It can be overwritten but cannot be deleted. Overwriting changes the position that is called up when [Home] is clicked in the [Preset] of the camera operation area. • Able to register up to 100 presets (including home position) in the camera. Calling a Preset Select the preset to call from [Preset List] and click [View] to reflect the preset settings on the camera. Check in the video display area. Preset display can also be executed from the camera control area on the main screen. For details, refer to "[Preset]" (P. 20). Note When clicking [View] to call a preset, the time to move to the pan/tilt/zoom position, and speed are reflected from the specified settings in [Preset] of the camera operation area. Deleting a Preset Select the preset from the [Preset List] and click [Delete] to delete the selected preset from the camera. Trace Function Trace is a function that can register up to 10 operations including camera pan, tilt, zoom operations, focus, and video quality, for activating when necessary. Since a trace is registered to a camera, it can be executed from any computer. Note that the pan, tilt, zoom, and focus operation by the trace function cannot be reproduced with exact precision. [Trace] Tab (1) (2) (3) (4) (5) (6) (1) [Trace List] Displays the trace [Number], [Trace Name], and [Trace Time] in a list. Double-click [Trace Name] and enter an arbitrary name to change [Trace Name]. (2) [Start Recording] Click to start trace recording (P. 31). (3) [Prepare Trace] Click to prepare the execution of the recorded trace (P. 31). (4) [Cancel] Click while recording or executing a trace to cancel these operations. (5) [Delete] Select the trace to be removed in [Trace List], then click [Delete] to remove it. (6) [Recording Camera Settings at Start] Enter a check in the checkbox to save the video quality adjustment settings at the start of a trace. The saved white balance and exposure settings are applied when a trace is executed. 30