Canon CR-X300 Remote Camera Control Application User Manual - Page 17

Selecting Cameras to Operate Select cameras to operate from this software. Turning On the Camera All cameras can be turned on or put into standby simultaneously using this software. • Turning on the cameras Click the menu and select [Camera Power] > [All On]. All cameras on standby in the video display area are turned on. • Setting cameras to standby Click the menu and select [Camera Power] > [All Standby]. All cameras in the video display area are set to standby. Selecting a Camera to Operate First, click the camera number and select a camera to operate. In order to select the cameras to operate, click the camera number of the target cameras in the video display area. The selected camera number turns orange.  Camera Selection Buttons The camera selection button number corresponds to the number of the camera in the video display area. Click [Select All] to select all cameras shown in the video display area as cameras to operate. Click [Clear] to deselect all cameras displayed in the video display area. Note The camera numbers of those not displaying the video in the video display area, on standby, or disconnected are indicated in gray. 17