Canon CR-X300 Remote Camera Control Application User Manual - Page 18

Operating Cameras Cameras can be operated using this software. It is also possible to operate multiple cameras simultaneously. Items that cannot be used depending on the model are indicated in gray. Note Detailed settings that cannot be changed in the camera operation area of this software need to be configured on the Camera's Settings Page. For details on the Settings Page, refer to the user manual of the camera. [Basic] Tab Pan/Tilt/Zoom as well as focus operations, preset movement, trace execution, exposure adjustment, and white balance adjustment are available in the camera operation area. Pan/Tilt/Zoom as well as focus operations, preset movement, and trace execution can be executed simultaneously when operating multiple cameras. Exposure and white balance adjustment are only available when operating a single camera.  [PTZ/Focus] Pan/Tilt/Zoom and focus operations of the Camera are available in this software. [Focus] Changes the focus settings. Autofocus is enabled when [AF] is set for [Focus], and manual focus is enabled when [AF] is off. [Near], [Far] Click [Near] to set the focus position to the near end, and click [Far] to set it to the far end. Click the buttons to continue moving the focus position. With autofocus, the focus is automatically adjusted once the button is released. [One Shot AF] By clicking [One Shot AF], once the focus is adjusted by autofocus, the focus will be fixed regardless of the status before clicking. Even before clicking, if the setting is for autofocus, once [One Shot AF] is clicked, it will be on manual focus. Note • Depending on the model being used, autofocus or tracking may not be possible at the edges of the screen. • If the zoom is operated after manually adjusting the focus, the focus may shift. 18