Canon CR-X300 Remote Camera Control Application User Manual - Page 29

Preset Function Able to register or delete presets from this software.  [Preset] tab (1) (2) (3) (4) (5) (6) (1) Preset List Displays [Number], [Preset Name], and [Register] of the presets as a list. Change the [Preset Name] by doubleclicking [Preset Name] and entering an arbitrary name. (2) [Add] Registers a preset and adds it to the list. For more information, refer to "Registering Presets" (P. 29). (3) [View] Click to display the currently selected preset. (4) [Stop] Click during a preset operation to stop displaying the preset. (5) [Delete] Delete a preset by selecting it from the [Preset List] and clicking [Delete]. (6) [Register] Select the setting value to register for the preset. If [PTZF] is checked, the pan/tilt/zoom position and [Focus] are registered as presets. If [Camera Settings] is checked, the following items are registered as presets: • [Basic] > [Exposure], [White Balance] • [Details] > [White Balance], [Image Quality]  Registering Presets To register a preset, follow the procedure below. 1 In the [Preset/Trace Settings] dialog, open the [Preset] tab. 2 Select the camera from the [Camera Name] list for which to register a preset. Camera video appears in the video display area. 3 Use the camera operation area to set a camera to register the presets. Adjust the camera angle to the position where desired to register the preset and adjust image quality, by operating the camera operation area. Also, check the settings to register in [PTZF] or [Camera Settings] under [Preset List]. 4 Select the desired preset number to register. If a number that has already been registered is selected, the contents will be overwritten. 5 Click [Add]. 29