Canon CR-X300 Remote Camera Control Application User Manual - Page 20

 [Preset] It is possible to call the presets registered to the camera. Register presets on [Preset/Trace Settings]. For details, refer to "Preset Function" (P. 29). (1) (2) (3) (4) (5) (1) Speed Mode Specify the time or speed to move to the Pan/Tilt/Zoom position. Click [Time (sec.)] to specify the time, or click [Speed Level] to specify the speed. Able to change the value by moving the slider knob or clicking or . (2) Preset number button Click a preset number registered to the camera to call the corresponding preset. Numbers not registered to the camera are indicated in gray. (3) [Home] Click to return the camera to the home position. (4) [Stop] Click during a preset operation to stop the operation. (5) Switch pages 11th preset and later are displayed in the 2nd page or later. Click a number to move to the page. Click one page ahead and click to move one page back. to move to Note • If the pan/tilt/zoom or focus of the camera is operated while a preset is running, the preset stops. However, another preset can be called while a preset is running. • Depending on the relationship between the pan/tilt/zoom position before the call and the registered pan/tilt/zoom position, and the [Time] setting, it may not operate within the set time. • Camera settings other than the pan/tilt/zoom position are reflected immediately when the preset is called. 20