Canon MF7280 imageCLASS MF7280 Network Guide - Page 119
Check the settings for [IP Address Range Settings]. See step 19 in TCP/IP
UPC - 013803056129
View all Canon MF7280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Detailed information concerning the machine cannot be set or browsed using the Remote UI or utility. Cause 1 The IP addresses of computers on which the Remote UI or utility is used are not allowed in [IP Address Range Settings]. Remedy If the settings for [IP Address Range Settings] do not permit the IP address of a computer on which the Remote UI or utility is used, you cannot set the machine setting items or browse information on the machine. Check the settings for [IP Address Range Settings]. (See step 19 in "TCP/IP Settings," on p. 3-4.) Cause 2 [Use SNMP] or [Enable Dedicated Port Settings] is set to 'Off'. Remedy Set [Use SNMP] and [Enable Dedicated Port Settings] to 'On'. (See "Communication Environment Setup," on p. 2-12.) Cause 3 The SNMP community name does not match. Remedy If you use an SNMP community name different from the one stored in the machine to access the machine from a utility, the utility will not detect the machine. In this case, check the SNMP community name. (See 6 "Communication Environment Setup," on p. 2-12.) Troubleshooting Network Connection Problems and Remedies 6-3