Home » Canon Manuals » Multifunction Devices » Canon MF7280 » Manual Viewer

Canon MF7280 imageCLASS MF7280 Network Guide - Page 20

Network Environment Setup Procedures

UPC - 013803056129

Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

Basic Network Settings Network Environment Setup Procedures Before using the machine in a network environment, it is necessary to perform the following setup procedures. 2 1 Network Cable Connection (See "Connecting the Machine," on p. 2-3.) Connect the machine to the network using the network cables. 2 Interface Settings (See "Interface Settings," on p. 2-7.) Specify the interface settings for communication between the machine and computers on your network. To specify the settings, use: • The machine's control panel • The Remote UI (via a web browser) 3 Communication Environment Setup (See "Communication Environment Setup," on p. 2-12.) Set up a configuration for communication between the machine and computers on your network. IMPORTANT If you are configuring the interface settings for the first time, use the control panel of this machine. After configuring the TCP/IP settings, you can change the content by using the Remote UI. 2-2 Network Environment Setup Procedures

Section	Page
Manuals for the Machine	3
How This Manual Is Organized	4
Contents	5
Preface	8
How to Use This Manual	8
Symbols Used in This Manual	8
Keys and Buttons Used in This Manual	9
Displays Used in This Manual	10
Abbreviations Used in This Manual	11
Legal Notices	12
Trademarks	12
Copyright	13
Disclaimers	13
Before You Start	14
System Environment Requirements	15
Printing or Sending a Fax from a Computer	15
Using E-Mail/I-Fax	16
Sending Data	17
Network Connection Diagram	18
Basic Network Settings	19
Network Environment Setup Procedures	20
Connecting the Machine	21
Connecting to a Network	22
Connecting to a USB Interface	23
Interface Settings	25
Settings from the Control Panel	25
Communication Environment Setup	30
Settings from the Control Panel	30
Using a TCP/IP Network	34
TCP/IP Network Setup Procedures	35
Protocol Settings	36
Settings from the Control Panel	37
Setting Up a Computer for Printing/Sending a Fax	57
Printer Connection Method (LPD/Raw)	58
Setting Up a Computer as a File Server	68
FTP Server Settings	69
Using a NetBIOS Network	87
NetBIOS Network Setup Procedures	88
Protocol Settings	89
Settings from the Control Panel	89
Setting Up a Computer as a File Server	95
Connecting to a TCP/IP Network	95
Connecting to a NetBIOS Network and Configuring a Shared Folder	96
Using Utilities to Make Network and Device Settings	114
NetSpot Device Installer	115
NetSpot Console	116
Troubleshooting	117
Network Connection Problems and Remedies	118
Printing Problems and Remedies	120
Data Sending/File Sharing Problems and Remedies	122
Appendix	124
Network Setting Items	125
Confirming Settings	131
Specifications	133
Ethernet Interface Adaptor	133
Glossary	134

Match case Limit results 1 per page

Network Environment Setup Procedures

2-2

Basic Network Settings

Network Environment Setup Procedures

Before using the machine in a network environment, it is necessary to perform the

following setup procedures.

Network Cable Connection (See "Connecting the Machine," on p. 2-3.)

Connect the machine to the network using the network cables.

Interface Settings (See "Interface Settings," on p. 2-7.)

Specify the interface settings for communication between the machine and computers on your network. To

specify the settings, use:

•

The machine's control panel

•

The Remote UI (via a web browser)

Communication Environment Setup (See "Communication Environment Setup," on p. 2-12.)

Set up a configuration for communication between the machine and computers on your network.

IMPORTANT

If you are configuring the interface settings for the first time, use the control panel of this

machine. After configuring the TCP/IP settings, you can change the content by using the

Remote UI.