Canon MF7280 imageCLASS MF7280 Network Guide - Page 28
Specify <Ethernet Type> on the Ethernet Driver Settings
UPC - 013803056129
View all Canon MF7280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
IMPORTANT If you reconnect the network cable (for example, reconnect the cable to a different Ethernet hub) with the power ON, the Auto Detect function will not work even if you set to 'On'. (Connect the cable with the power OFF.) NOTE The default setting is 'On'. Use the [Off] setting when you want to specify a particular Ethernet setting. 2 6 Specify on the Ethernet Driver Settings screen. Basic Network Settings ● If you want to alternately send and receive: ❑ Press [Half Duplex]. ● If you want to simultaneously send and receive: ❑ Press [Full Duplex]. 7 Specify on the Ethernet Driver Settings screen. ● If you want to establish a 10Base-T network connection: ❑ Press [10 Base-T]. ● If you want to establish a 100Base-TX network connection: ❑ Press [100 Base-TX]. 8 Confirm the settings you specified ➞ press [OK]. The display returns to the Network Settings screen. 9 Press [Done] repeatedly until the Additional Functions screen closes. 10 Restart the machine. ❑ Turn OFF the machine, wait at least 10 seconds, and then turn it ON. 2-10 Interface Settings