Canon MF7280 imageCLASS MF7280 Network Guide - Page 58
Printer Connection Method (LPD/Raw), Windows 98/Me
UPC - 013803056129
View all Canon MF7280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
- If you want to use the PCL printer driver See the procedure for alternative printer driver installation in Chapter 2, "Getting Started,'' in the PCL Driver Guide. - If you want to use the UFR II printer driver See the procedure for alternative printer driver installation in Chapter 2, "Getting Started,'' in the UFR II Driver Guide. - If you want to use the fax driver See the procedure for alternative printer driver installation in Chapter 2, "Getting Started,'' in the Fax Driver Guide. Printer Connection Method (LPD/Raw) The following is the procedure for specifying the port setting. 3 Windows 98/Me Using a TCP/IP Network ■ Installing a New Driver 1 Install the driver. Install the driver according to the procedures indicated in the Starter Guide. IMPORTANT lf your computer fails to transmit data to the printer during installation of the driver, when the error message appears, click [No] ➞ set the byte count mode to off. NOTE • The print application will be LPD and the print queue will be set to if the driver has been installed according to the above procedures. • This machine enables you to specify print queues other than . For details on print queues and instructions on how to change the settings, see "Changing the Port after Installing the Driver," on p. 3-26. Setting Up a Computer for Printing/Sending a Fax 3-25