Canon MF7280 imageCLASS MF7280 Network Guide - Page 33
Press [Done] repeatedly until the Additional Functions screen, closes., Restart the machine.
UPC - 013803056129
View all Canon MF7280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Basic Network Settings ● If you do not want to set or browse detailed information on the machine with a Canon printer driver or utility: ❑ On the Network Settings screen, press [▼] or [▲] until [Enable Dedicated Port] appears ➞ press [Enable Dedicated Port]. ❑ Press [Off]. ❑ Press [OK]. The display returns to the Network Settings screen. 2 IMPORTANT • If you want to use a Canon printer driver or utility, press [On] for both and . • You can restrict the IP addresses of computers on which items can be set or browsed. If you restrict the IP addresses, it is not possible to set or browse detailed information concerning the machine on computers other than those whose IP addresses are allowed, even if both and are 'On'. For details, see "Protocol Settings," on p. 3-3. 3 Press [Done] repeatedly until the Additional Functions screen closes. 4 Restart the machine. ❑ Turn OFF the machine, wait at least 10 seconds, and then turn it ON. NOTE For instructions on how to turn ON/OFF the machine, see Chapter 1, "Before You Start Using This Machine," in the Reference Guide. The communication environment setup is complete. Proceed to Chapters 3 or 4. Communication Environment Setup 2-15