Canon MF7280 imageCLASS MF7280 Network Guide - Page 55
Startup Time Settings, Press, Additional Functions, System Settings], Network Settings].
UPC - 013803056129
View all Canon MF7280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Startup Time Settings If you connect the machine to a switching hub, it may not be able to connect to a network even though your network settings are set correctly. This occurs because the spanning tree process performed between switching hubs prevents them from communicating with each other immediately after the machine connects to a switching hub. In this case, use the following procedure to delay the start of communication. 3 1 Press (Additional Functions) ➞ [System Settings] ➞ [Network Settings]. 2 Press [▼] or [▲] until [Startup Time Settings] appears ➞ press [Startup Time Settings]. Using a TCP/IP Network 3-22 Protocol Settings
Protocol Settings
3-22
3
Using a TCP/IP Network
Startup Time Settings
If you connect the machine to a switching hub, it may not be able to connect to a
network even though your network settings are set correctly.
This occurs because the spanning tree process performed between switching hubs
prevents them from communicating with each other immediately after the machine
connects to a switching hub.
In this case, use the following procedure to delay the start of communication.
1
Press
(Additional Functions)
➞
[System Settings]
➞
[Network Settings].
2
Press [
▼
] or [
▲
] until [Startup Time Settings] appears
➞
press
[Startup Time Settings].