Canon MF7280 imageCLASS MF7280 Network Guide - Page 63
If you want to use LPD, change the port configuration, information. If you want to use Raw, proceed
UPC - 013803056129
View all Canon MF7280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Using a TCP/IP Network 10 If you want to use LPD, change the port configuration information. If you want to use Raw, proceed to step 11. ❑ In the printer properties dialog box, click [Configure Port]. ❑ Click [LPR] under [Protocol] ➞ enter a print queue in [Queue Name] under [LPR Settings] ➞ click [OK]. For Windows 2000 3 You can specify a print queue in [Queue Name]. The following three print queues are available: • LP The machine prints according to its spool settings. Normally, is entered as a print queue. • SPOOL The machine prints only after spooling a print job on the hard disk, regardless of its spool settings. • DIRECT The machine prints without spooling a print job on the hard disk, regardless of its spool settings. NOTE If you are using Raw, this step is not required. 11 Click [OK]. The installation of the driver and the port settings is complete. 3-30 Setting Up a Computer for Printing/Sending a Fax