Canon MF7280 imageCLASS MF7280 Network Guide - Page 48
If you want to disable an IP address filter, press [First Address]
UPC - 013803056129
View all Canon MF7280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Using a TCP/IP Network ❑ If you want to store only one IP address, press [Single Address] ➞ enter the IP address that is to be permitted or rejected using - (numeric keys) ➞ press [OK]. 3 ❑ If you want to store a range of IP addresses that are to be permitted or rejected, press [Multiple Addresses] ➞ press [First Address] ➞ enter the first IP address in the range using - (numeric keys) ➞ press [Last Address] ➞ enter the last IP address in the range ➞ press [OK]. ● If you want to disable an IP address filter: ❑ Leave the settings at the default. IMPORTANT • You can register a maximum of four IP addresses or IP address ranges. • An IP address of cannot be specified. • The value of [First Address] for [Multiple Addresses] should be smaller than or equal to that of [Last Address]. • If the usage of a protocol or print application is not permitted on your device, it cannot be used even after its IP address is permitted on the machine; on your device, configure the settings to permit the protocol or print application. Protocol Settings 3-15