Canon PIXMA MP800 MP800 User's Guide - Page 118
Cannot Scan Films - troubleshooting guide
View all Canon PIXMA MP800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Cannot Scan Films Cause Film guide not correctly placed on the Platen Glass. Action Insert the film in the film guide supplied for this machine and place it in the correct position on the Platen Glass. The Document Cover is not closed. Close the Document Cover properly. You have not removed the FAU Protective Sheet. Remove the FAU Protective Sheet from under the Document Cover. The Scanner Lock Switch is not released. Slide the Scanner Lock Switch to the release position , press [ON/OFF] to turn the machine off. Then, turn the power back on. Cannot obtain a clean scan, colors scan incorrectly Cause Dust or dirt is stuck to the Platen Glass or on the FAU Lamp. Action Remove the dust or dirt from the Platen Glass or the FAU Lamp. See "Cleaning Your Machine" on page 107. Film condition is poor due to faded colors. Scan using . See "Memory card and Photo/film modes" on page 35. Note If a print out of an image does not appear satisfactory or the same as what you see on the monitor, you may need to change the print settings, or the machine itself may have engaged in problems. See "Ink Does Not Come Out/Printing is Blurred/Colors are Wrong/White Streaks/Straight Lines are Misaligned/Cannot Print to End of Job" on page 117. If the slide mounts are white then Use black mounts, or mask the slide mount with a black frame. light reflected off them will show up. Frames are not detected correctly Cause Film is out of position. Action Reposition the film in the film guide so that the frame of the guide does not obscure them. Note It may not be improved even if repositioning the film depending on the film. In that case, scan from the computer. For details, refer to the Scan Guide. 116 Troubleshooting Chapter 12