Canon PIXMA MP800 MP800 User's Guide - Page 28

Important z Envelopes can be used only when printing from a computer. z Do not use envelopes with embossed or treated surfaces, a double flap, pressure seals or sticker flaps. z Select either [DL Env.] or [Comm. Env. #10] according to the envelope size you are using. z The printed image will be upside down depending on the application. If this occurs, open the printer properties dialog box then select the [Rotate 180 degrees] check box on the [Page Setup] tab. For information on the printer driver settings, refer to the Printer Driver Guide. 1 Load the envelope against the Cover Guide on the right side of the Paper Support with the print side facing UP, and the rear flaps DOWN on the left. Important Ensure that the Cover Guide stands when you load paper in the Auto Sheet Feeder. Note A maximum of 10 envelopes can be loaded at once. 2 Pinch the Paper Guide and slide it against the left side of the envelope. 3 Press [Feed Switch] so that the Auto Sheet Feeder Lamp lights. 4 Select [Envelope] in [Media Type], and then select [DL Env.] or [Comm. Env. #10] in [Page Size]. For information on the printer driver settings, refer to the Printer Driver Guide. (A) 1 2 3 (B) Note z Fold the envelope flap shut (A). z Printing direction (B). z Loading Other Small-Sized Paper in the Auto Sheet Feeder Important Loading plain paper cut to 4" x 6" / 101.6 mm x 152.4 mm, 5" x 7" / 127.0 x 177.8 mm, or 2.13" x 3.39" / 54.0 x 86.0 mm (Credit Card) size for a trial printing can cause paper jams. 26 Before Printing Chapter 1